How to use and install foam generator TR130

What is the performance of foam generator TR130

The foam generator TR130 is a high-pressure foam preparation machine, suitable for factory production. The operation is simple, fast and durable. The maximum power consumption of this machine is about 13kw, and the maximum foaming capacity is about 0.55m3/min.

Power requirements: This product is a three-phase 380V power supply mode. When wiring, be sure to connect the power supply as required. Three-phase voltage 380V/50Hz.

Control function: press the green start button to start running, press the red stop button, the equipment stops running, the operation interface is simple and convenient, and the operation is simple.

How to use and install foam generator TR130

Power connection: This equipment uses a three-phase 380V power supply. After all the lines are connected, click the start button, and then immediately click the stop button to check the direction of rotation. Make sure that the direction of rotation of the motor is correct. If the motor rotates in the wrong direction, the two live wires need to be exchanged arbitrarily, and don't connect them wrongly.

Note: After the wiring is completed and the power is turned on, the panel voltmeter will display. When the display voltage is normally 380V, the air switch can be closed at this time, and the equipment enters the operating state.

Pipe connection: Please connect the water pipe and foaming agent suction pipe to the corresponding interface on the front of the device. use

Wrap tape around the joint to prevent air leakage. If a leak occurs, you cannot pump the blowing agent or

Insufficient flow will affect the foaming efficiency.

Bubble tube: The bubble tube is external and detachable. The front end of the bubble tube is detachable, and the steel ball filled in the tube can be replaced. The operation is simple, convenient and fast when disassembling.

CLC block foam generator price

The supply and demand of the CLC block foam generator market varies randomly. Tanki New Materials Co. Ltd aims to help all industries and chemical wholesalers find high-quality, low-cost nanomaterials and chemicals by providing a full set of customized services. If you are looking for a CLC block foam generator, please feel free to send an inquiry to get the latest price

CLC block foam generator suppliers

As a global CLC block foam generator supplier, Tanki New Materials Co. Ltd has extensive experience in the performance, application and cost-effective manufacturing of advanced and engineered materials. The company has successfully developed a series of powder materials (molybdenum disilicide, CLC block foam generator, calcium silicide, iron boride), high-purity targets, functional ceramics and structural devices, and provide OEM services.

Parameters of TR130 foam generator