Overview of 92% 95% Alumina Ceramic Lining Plate Aluminum Oxide Ceramic Wear Liner Tile for Coal Washing Industry

92% 95% Alumina Ceramic Lining Plate Aluminum Oxide Ceramic Wear Liner Tile for Coal Washing Industry are one of the most widely used and versatile technical ceramics, prized for their excellent combination of properties. Composed primarily of aluminum oxide (Al₂O₃), they offer outstanding hardness, wear resistance, and electrical insulation, even at high temperatures. From low-purity grades for general industrial use to high-purity compositions for demanding applications, alumina ceramics provide a cost-effective and reliable solution across a vast range of industries.

Features of 92% 95% Alumina Ceramic Lining Plate Aluminum Oxide Ceramic Wear Liner Tile for Coal Washing Industry

• High Hardness & Wear Resistance: Excellent resistance to abrasive wear, making it ideal for liners, nozzles, and guides.

• Superior Electrical Insulation: Maintains high electrical resistivity and dielectric strength, even at elevated temperatures.

• Excellent Thermal Stability: Withstands high operating temperatures and exhibits good thermal conductivity.

• High Mechanical Strength: Possesses good compressive strength and stiffness.

• Chemical Inertness: Resists corrosion from a wide range of acids, alkalis, and other harsh chemicals.

• Cost-Effectiveness: A highly versatile and economically efficient ceramic material for numerous applications.

Specification of 92% 95% Alumina Ceramic Lining Plate Aluminum Oxide Ceramic Wear Liner Tile for Coal Washing Industry

These alumina ceramic lining plates secure coal cleaning devices. They are made from top-quality light weight aluminum oxide. The product comes in two purity degrees: 92% and 95% Al2O3. This high alumina web content offers the ceramic tiles remarkable buildings. They are very hard and resist abrasion extremely well. Coal, rock, and slurry trigger hefty wear. These floor tiles stand up to that rough environment properly.

The ceramic floor tiles are very thick. Their density has to do with 3.6 g/cm SIX. This density reduces water absorption. It also adds to their general toughness. The ceramic tiles are unbelievably hard, ranked 9 on the Mohs scale. This firmness is key for quiting unpleasant fragments from cutting right into the surface area. It makes them far much better than steel or rubber linings in wear areas.

Different thicknesses are readily available. Usual densities include 10mm, 15mm, 20mm, 25mm, and 30mm. You pick the density based upon the expected wear. Heavier wear needs thicker tiles. The floor tiles come in different shapes and sizes too. Square, rectangle, and hexagon forms are typical. Custom forms can be created details tools requirements.

Installment is uncomplicated. The ceramic tiles get adhered straight onto tidy steel surface areas utilizing solid epoxy adhesive. Rubber support is likewise an alternative for some applications. This gives influence resistance in addition to wear defense. Bolted installation using countersunk holes is another reputable approach. This ensures the tiles stay safely in place.

These alumina ceramic linings are excellent for coal handling. They line chutes, hoppers, bunkers, pipes, and cyclones. They secure screens and classifiers. Utilizing them cuts down on maintenance time and expenses. Tools lasts a lot longer. Production downtime is decreased. The ceramic tiles supply a lasting, cost-effective option for unpleasant wear issues.

Applications of 92% 95% Alumina Ceramic Lining Plate Aluminum Oxide Ceramic Wear Liner Tile for Coal Washing Industry

Alumina ceramic lining plates solve severe wear troubles in coal cleaning plants. Coal cleaning plants face hefty wear daily. Coal slurry and hard fragments frequently damage tools surfaces. This brings about frequent substitutes and costly downtime. These ceramic floor tiles offer a strong remedy. Made from 92% or 95% pure light weight aluminum oxide, they are unbelievably difficult. This hardness straight combats abrasion. Devices lasts much longer.

The floor tiles endure severe effect. Coal swellings and rocks striking the linings cause minimal damages. The product additionally withstands chemical corrosion well. Usual washing chemicals and water won’t weaken it. This mix means linings function dependably for many years. Plants save cash on substitutes and maintenance.

Setup is uncomplicated. Workers bond the floor tiles directly onto steel surface areas using solid epoxy or rubber adhesive. Conversely, they bonded floor tiles onto special steel backers initially. Then they bolt these backed plates onto the equipment. Both methods create a protected, resilient bond.

These liners secure lots of vital locations. Coal chutes see consistent abrasive flow. Ceramic linings maintain chute walls undamaged. Cyclones manage fast-moving slurry under stress. Linings protect cyclone insides from quick wear. Pipes carrying coal slurry wear out promptly. Ceramic sleeves inside pipelines prolong their life considerably. Screw conveyors moving coal additionally require security. Linings on conveyor troughs and screws prevent premature failure. Shaking displays separating coal dimensions experience effect damages. Ceramic floor tiles on screen decks and feed boxes withstand this impact. Bunker walls saving coal endure constant scraping. Lining these walls with ceramic tiles decreases maintenance significantly. Sphere mills grinding coal use ceramic liners inside the mill shell. This safeguards the shell from grinding media and coal.

Company Profile

Tanki New Materials Co.Ltd. focus on the research and development, production and sales of ceramic products, serving the electronics, ceramics, chemical and other industries. Since its establishment in 2015, the company has been committed to providing customers with the best products and services, and has become a leader in the industry through continuous technological innovation and strict quality management.

Our products includes but not limited to Aerogel, Aluminum Nitride, Aluminum Oxide, Boron Carbide, Boron Nitride, Ceramic Crucible, Ceramic Fiber, Quartz Product, Refractory Material, Silicon Carbide, Silicon Nitride, ect. please feel free to contact us.

Payment Methods

T/T, Western Union, Paypal, Credit Card etc.

Shipment Methods

By air, by sea, by express, as customers request.

5 FAQs of 92% 95% Alumina Ceramic Lining Plate Aluminum Oxide Ceramic Wear Liner Tile for Coal Washing Industry

What are alumina ceramic lining plates?
These are hard tiles made mostly from aluminum oxide. They protect surfaces in coal washing plants. Coal slurry causes heavy wear. These tiles shield equipment like chutes and hoppers. They stop damage from abrasion.

Why use them in coal washing?
Coal slurry is rough on equipment. It scrapes metal surfaces quickly. Alumina tiles are much harder than steel. They resist wear better. This reduces how often you need repairs. It saves money on downtime and replacement parts.

How long do they last?
They last much longer than steel liners. Expect 5 to 10 times longer service life. Actual lifespan depends on the coal’s abrasiveness and the flow speed. They withstand constant impact and scraping very well. Their extreme hardness makes them durable.

How are they attached?
Workers fix them to steel surfaces using strong adhesive or bolts. Bolt holes are molded into the tiles. This creates a secure bond. The backing plate holds them firmly. This prevents tiles from coming loose under heavy flow. Proper installation is key for maximum life.

Can I get different sizes?
Yes. Manufacturers offer many sizes and thicknesses. Common thicknesses are 10mm, 15mm, 20mm, and 25mm. Tile shapes include squares, rectangles, and hexagons. Custom sizes are often possible. This ensures a good fit for your specific equipment layout.