Overview of XTM-1 high-purity ceramic fiber wool for industrial fiber applications, including industrial-grade ceramic fiber modules.

XTM-1 high-purity ceramic fiber wool for industrial fiber applications, including industrial-grade ceramic fiber modules. is a lightweight, high-temperature insulation material composed primarily of alumina-silica. It is manufactured through a melting and spinning or blowing process, resulting in a flexible, wool-like textile. This material is engineered to provide exceptional thermal management, conserving energy and protecting equipment in extreme temperature environments across various industries.

Features of XTM-1 high-purity ceramic fiber wool for industrial fiber applications, including industrial-grade ceramic fiber modules.

• Excellent Thermal Stability: Withstands continuous operating temperatures up to 1260°C (2300°F) and higher for certain grades, with minimal shrinkage.

• Low Thermal Conductivity: Provides highly efficient insulation, reducing heat loss and improving energy efficiency.

• Lightweight & Low Heat Storage: Offers low thermal mass, enabling rapid heat-up and cool-down cycles for improved process control and energy savings.

• Thermal Shock Resistance: Highly resistant to damage from rapid temperature changes.

• Excellent Flexibility & Resilience: Can be fabricated into blankets, boards, papers, and textiles to fit complex shapes and applications.

• Good Chemical Stability: Resists attack from most corrosive agents, except strong alkalis and hydrofluoric acid.

Specification of XTM-1 high-purity ceramic fiber wool for industrial fiber applications, including industrial-grade ceramic fiber modules.

XTM-1 high-purity ceramic fiber woollen offers demanding commercial warmth management requirements. This product excels in severe temperature settings. It supplies exceptional thermal security and low warmth storage space. The primary composition is alumina-silica. It includes over 99% pure oxide fibers. This high pureness makes sure minimal contaminations. Impurities can create troubles at extremely high heat. XTM-1 holds up against temperature levels as much as 1430 ° C(2606 ° F). It manages continuous procedure at 1260 ° C (2300 ° F). This makes it perfect for intense commercial processes.

The fiber framework is consistent and fine. This framework delivers outstanding strength and handling toughness. Employees find it less complicated to set up and shape. It withstands tearing during use. The low thermal conductivity is a key advantage. It offers remarkable insulation. This conserves significant power prices. Heaters and kilns remain hotter inside. Less warm leaves right into the surrounding area. Plants see lower gas consumption. The material likewise has low shot web content. Shot describes unfiberized bits. Reduced shot means better performance and much less dust.

XTM-1 is the core material for commercial ceramic fiber components. These modules are pre-assembled devices. They accelerate heating system lining setup. The fiber woollen’s durability is crucial right here. Modules compress throughout installment. After that they increase to develop a limited seal. This creates a smooth, energy-efficient lining. The lining withstands thermal cycling. Temperature level changes create development and tightening. XTM-1 components sustain this tension well. They maintain integrity over extended periods. This decreases upkeep downtime.

Handling requires care. Constantly make use of suitable personal protective devices. This consists of gloves, masks, and eye defense. The fibers are very fine. Proper safety gear protects against skin irritation and inhalation dangers. Comply with all maker security standards strictly. This item supplies dependable high-temperature insulation. It sustains efficient and safe industrial operations.

Applications of XTM-1 high-purity ceramic fiber wool for industrial fiber applications, including industrial-grade ceramic fiber modules.

XTM-1 high-purity ceramic fiber wool uses exceptional insulation for demanding industrial warm processes. Its heat rating stands well in extreme environments. The low thermal conductivity keeps heat inside heaters properly. This saves considerable energy expenses with time. Furnace linings benefit greatly from this product. XTM-1 wool provides trustworthy thermal defense for heating system wall surfaces and roof coverings. It guarantees consistent interior temperatures. Industrial ceramic fiber modules depend greatly on materials like XTM-1. Workers compress and fold up the wool into pre-assembled components. These modules install rapidly in heaters and heating units. They supply solid insulation performance instantly. The modules manage thermal shock very well. They stand up to cracking throughout rapid temperature level changes common in commercial cycles. Expansion joints need an adaptable, resistant material. XTM-1 woollen fits perfectly here. It presses and expands safely. This motion soaks up anxiety without damages. The material preserves its honesty at the joint area. Gasketing applications need a material that seals securely. XTM-1 woollen creates reliable seals around heater doors and accessibility points. It protects against warm leaks efficiently. Pipeline and duct insulation is another key usage. Covering pipelines with XTM-1 woollen minimizes warm loss. This keeps procedure temperature levels steady. The product is lightweight. This lowers stress on assistance structures. Handling and setup are easier. Employees value its ease of usage. Chemical stability is a major advantage. XTM-1 resists assault from lots of furnace atmospheres. This guarantees long life span.

Company Profile

Tanki New Materials Co.Ltd. focus on the research and development, production and sales of ceramic products, serving the electronics, ceramics, chemical and other industries. Since its establishment in 2015, the company has been committed to providing customers with the best products and services, and has become a leader in the industry through continuous technological innovation and strict quality management.

Our products includes but not limited to Aerogel, Aluminum Nitride, Aluminum Oxide, Boron Carbide, Boron Nitride, Ceramic Crucible, Ceramic Fiber, Quartz Product, Refractory Material, Silicon Carbide, Silicon Nitride, ect. please feel free to contact us.

Payment Methods

T/T, Western Union, Paypal, Credit Card etc.

Shipment Methods

By air, by sea, by express, as customers request.

5 FAQs of XTM-1 high-purity ceramic fiber wool for industrial fiber applications, including industrial-grade ceramic fiber modules.

What is XTM-1 ceramic fiber wool?
XTM-1 is a high-purity ceramic fiber wool. It’s made from alumina and silica. This material handles extreme heat very well. It’s designed for tough industrial jobs. Think furnaces, kilns, and high-temperature pipes.

Why choose XTM-1 for insulation?
XTM-1 offers excellent thermal insulation. It traps heat effectively. This reduces energy loss significantly. Your equipment stays hotter inside. Less energy is needed to maintain temperature. It saves money. It also has low heat storage. This means equipment heats up and cools down faster. Production cycles improve.

How are industrial modules made with XTM-1?
Modules are pre-fabricated insulation units. Manufacturers compress layers of XTM-1 wool. They stitch it onto a special fabric backing. This creates stiff, foldable panels. Workers install these panels quickly. They hook them onto anchor studs. This forms a complete insulation layer inside furnaces or boilers. It’s much faster than loose wool.

Is XTM-1 wool safe to handle?
Handle XTM-1 with care. The fibers can irritate skin and lungs. Always wear gloves. Wear a proper dust mask when cutting or installing. Good ventilation is essential. Once installed inside equipment, the fibers are contained. The heat binds them together. This minimizes fiber release during operation.

Where is XTM-1 wool typically used?
XTM-1 is ideal for heavy industry. Common uses include lining steel and aluminum melting furnaces. It insulates petrochemical cracking heaters. It protects power plant boilers. It’s used in ceramic kilns and heat treatment furnaces. Anywhere extreme heat needs reliable, long-lasting insulation, XTM-1 works.