Overview of R400 Single Curved B4c Monolithic Plate Boron Carbide Ceramic

R400 Single Curved B4c Monolithic Plate Boron Carbide Ceramic is an ultra-hard advanced ceramic, ranking as the third hardest material known after diamond and cubic boron nitride. Often referred to as “black diamond,” it is the premier choice for extreme applications requiring maximum hardness and lightweight properties, particularly in the field of ballistic armor and abrasive environments.

Features of R400 Single Curved B4c Monolithic Plate Boron Carbide Ceramic

• Exceptional Hardness: Possesses a hardness level near that of diamond, making it ideal for abrasive and wear-resistant applications.

• Extremely Lightweight: With a low density, it offers an outstanding strength-to-weight ratio, crucial for personal and aviation armor.

• Outstanding Ballistic Performance: The premier material for high-performance body and vehicle armor plates, capable of defeating high-velocity threats.

• High Neutron Absorption: An excellent neutron capture cross-section makes it a key material for nuclear reactor control rods and shielding.

• Excellent Chemical Resistance: Highly inert and resistant to acids and alkalis, ensuring performance in corrosive environments.

• High-Temperature Stability: Maintains its properties and structure at elevated temperatures.

Specification of R400 Single Curved B4c Monolithic Plate Boron Carbide Ceramic

The R400 is a solitary curved shield plate made completely from boron carbide ceramic. This material is called B4C. The plate is one strong item, not layered. It provides very high solidity. Boron carbide is among the hardest materials offered. This hardness is essential for stopping bullets and pieces.

The plate has a rounded form. This curve helps it fit much better on body shield or lorry surfaces. The curve also enhances ballistic efficiency. Level plates can be less effective against particular hazards. The contour assists take care of the effect energy.

Boron carbide ceramic is extremely lightweight. This is a major advantage over steel armor. Lighter armor reduces wearer exhaustion. It enables better movement. Soldiers and protection employees benefit dramatically from this weight conserving.

The R400 offers outstanding security levels. It fulfills or goes beyond typical ballistic scores like NIJ Level IV. It quits high-powered rifle rounds successfully. It additionally secures against armor-piercing threats. This consists of typical army qualities.

This plate resists severe conditions well. It takes care of high temperatures without shedding toughness. It carries out dependably in very chilly settings also. Boron carbide is chemically inert. It does not corrode quickly. Salt water or chemicals will not damage it.

The monolithic design indicates no layers to separate. Bound plates can fail at the joints. This strong ceramic plate avoids that problem. It provides regular defense across its whole surface. Edge honesty is likewise solid.

Maintenance is straightforward. Clean the plate clean with water and mild soap. Avoid harsh chemicals or unpleasant cleaners. Examine it aesthetically after any type of effect. Store it in a trendy, dry place away from straight sunshine. Correct care makes certain lengthy service life.

The R400 is used in military body shield plates. It is also utilized in tactical vehicle panels. Protection applications consist of VIP security details. It fits any type of situation needing light-weight, top-level ballistic security. Its single contour layout boosts fit and feature.

Applications of R400 Single Curved B4c Monolithic Plate Boron Carbide Ceramic

R400 Single Bent B4C Plate delivers top-level protection versus ballistic hazards. This boron carbide ceramic plate is unbelievably difficult. It shatters inbound bullets and fragments on effect. The power gets spread out fast. This quits infiltration. The curved shape fits body shield contours better. This boosts wearer convenience and flexibility. Protection doesn’t imply heavy weight. R400 plates are dramatically lighter than steel plates using comparable security. Soldiers and police action easier. Tiredness is lowered throughout long procedures.

Past shield, R400 plates strive in difficult industrial tasks. Boron carbide stands up to using down. It lasts a lot longer than steel in abrasive settings. Think sandblasting nozzles. Assume components handling sandy products. Downtime for substitute decreases. Manufacturing maintains running.

R400 plates also serve crucial duties in nuclear setups. Boron carbide soaks up neutrons quite possibly. This makes it ideal for regulating nuclear reactions. You discover it in control poles and securing components. Security relies on its reputable performance. Radiation direct exposure obtains reduced.

The material itself is unique. Boron carbide (B4C) is just one of the hardest synthetic compounds. It defeats alumina and silicon carbide. Just diamond is harder. This solidity offers it impressive resistance. It withstands wear, abrasion, and chemical assault exceptionally well.

Company Profile

Tanki New Materials Co.Ltd. focus on the research and development, production and sales of ceramic products, serving the electronics, ceramics, chemical and other industries. Since its establishment in 2015, the company has been committed to providing customers with the best products and services, and has become a leader in the industry through continuous technological innovation and strict quality management.

Our products includes but not limited to Aerogel, Aluminum Nitride, Aluminum Oxide, Boron Carbide, Boron Nitride, Ceramic Crucible, Ceramic Fiber, Quartz Product, Refractory Material, Silicon Carbide, Silicon Nitride, ect. please feel free to contact us.

Payment Methods

T/T, Western Union, Paypal, Credit Card etc.

Shipment Methods

By air, by sea, by express, as customers request.

5 FAQs of R400 Single Curved B4c Monolithic Plate Boron Carbide Ceramic

What is the R400 Single Curved Plate made from?
It’s made from Boron Carbide ceramic, known as B4C. This is one of the hardest man-made materials available. It’s much lighter than steel. It offers excellent protection.

Why choose Boron Carbide over metal armor?
Boron Carbide is significantly lighter than steel armor. It’s also much harder. This hardness helps shatter high-velocity bullets on impact. The weight savings let you move faster and carry gear longer. Protection levels stay very high.

How tough is this plate?
The R400 plate is extremely tough. It’s designed to stop multiple high-powered rifle rounds. It meets strict NIJ Level IV standards. This means it reliably stops common armor-piercing rifle threats. It handles extreme conditions well.

Where is the curved shape useful?
The single curve fits the body’s natural shape better than flat plates. This improves comfort during extended wear. It also helps the plate sit correctly against your torso. The curve makes moving and aiming easier. It integrates well with most plate carriers.

How do I care for my Boron Carbide plate?
Keep the plate clean. Wipe it down with a damp cloth after use. Avoid harsh chemicals. Don’t drop it hard on sharp edges or corners. Store it flat in a cool, dry place. Check it regularly for any cracks or deep damage. Replace it if you find major flaws.