Overview of Hot-ing ceramic fiber board for furnace fire doors

Hot-ing ceramic fiber board for furnace fire doors is a lightweight, high-temperature insulation material composed primarily of alumina-silica. It is manufactured through a melting and spinning or blowing process, resulting in a flexible, wool-like textile. This material is engineered to provide exceptional thermal management, conserving energy and protecting equipment in extreme temperature environments across various industries.

Features of Hot-ing ceramic fiber board for furnace fire doors

• Excellent Thermal Stability: Withstands continuous operating temperatures up to 1260°C (2300°F) and higher for certain grades, with minimal shrinkage.

• Low Thermal Conductivity: Provides highly efficient insulation, reducing heat loss and improving energy efficiency.

• Lightweight & Low Heat Storage: Offers low thermal mass, enabling rapid heat-up and cool-down cycles for improved process control and energy savings.

• Thermal Shock Resistance: Highly resistant to damage from rapid temperature changes.

• Excellent Flexibility & Resilience: Can be fabricated into blankets, boards, papers, and textiles to fit complex shapes and applications.

• Good Chemical Stability: Resists attack from most corrosive agents, except strong alkalis and hydrofluoric acid.

Specification of Hot-ing ceramic fiber board for furnace fire doors

Hot-ing ceramic fiber boards are the top option for protecting heater fire doors. They handle extreme heat effectively. These boards withstand temperature levels as much as 2300 ° F (1260 ° C). This high score is important for fire doors facing straight fires and extreme warm. You require a material that will not fail under these problems.

The boards supply superb thermal insulation. Their framework catches heat properly. This stops way too much warm from running away via the door. It maintains heating system temperatures steady and conserves significant energy. Less warm loss implies lower operating expense for your heating system. The reduced thermal conductivity ranking shows this shielding power.

Thickness is an additional essential variable. Hot-ing boards are commonly around 300 kg/m FIVE. This thickness equilibriums stamina and insulation. The boards are strong enough to hold their form under pressure. They withstand compression and mechanical wear typical on relocating doors. They stay stiff and don’t droop or fall apart easily.

These ceramic fiber boards are difficult against thermal shock. Doors open and close frequently. This triggers quick temperature modifications. The boards manage this stress and anxiety without cracking or breaking. They broaden and contract really little with warmth. This dimensional stability prevents gaps and preserves an excellent door seal.

Safety and security is essential. The boards save really little heat. They cool down quickly after the heating system turns off. This minimizes burn dangers for workers. The product itself is non-combustible. It doesn’t shed or release dangerous smoke if revealed to fire. It also stands up to most chemicals located in furnace ambiences.

Installment is straightforward. The boards are simple to reduce to fit any kind of door panel dimension. You can shape them with standard tools. They attach firmly using common mechanical bolts or high-temperature adhesives. This makes changing old insulation simple. The boards are lightweight. This puts much less pressure on door joints and operating devices.

Applications of Hot-ing ceramic fiber board for furnace fire doors

Ceramic fiber boards are excellent for heater fire doors. They take care of extreme warm effectively. This material maintains the heat inside the heating system. The door surface stays much cooler. Employees are much safer around the hot heater. Touching the door is much less dangerous.

These boards are solid but light-weight. They are simple to cut and shape. Setup ablaze doors is easy. The boards fit well right into door frames. This seals spaces successfully. Heat loss drops dramatically. Less heat retreat indicates better heater efficiency. Energy expenses decrease. Cost savings accumulate gradually.

The boards withstand thermal shock completely. Fast temperature level modifications create no damages. The product stays strong cycle after cycle. It does not split or warp under heat stress and anxiety. Furnace doors last longer. Maintenance needs are lowered. Downtime for repair work is less constant.

Security enhances significantly. The cooler door surface decreases shed risks. Unintentional get in touch with is much less unsafe. The boards act as an effective warmth barrier. Internal heater temperature levels stay secure. Process control is easier. Product high quality take advantage of consistent warmth.

Longevity is a key benefit. Ceramic fiber boards endure extreme heating system conditions. They withstand chemical assault from heating system ambiences. Long service life is anticipated. Substitute prices are minimized. The product provides trustworthy insulation time after time. Heater efficiency remains high.

Company Profile

Tanki New Materials Co.Ltd. focus on the research and development, production and sales of ceramic products, serving the electronics, ceramics, chemical and other industries. Since its establishment in 2015, the company has been committed to providing customers with the best products and services, and has become a leader in the industry through continuous technological innovation and strict quality management.

Our products includes but not limited to Aerogel, Aluminum Nitride, Aluminum Oxide, Boron Carbide, Boron Nitride, Ceramic Crucible, Ceramic Fiber, Quartz Product, Refractory Material, Silicon Carbide, Silicon Nitride, ect. please feel free to contact us.

Payment Methods

T/T, Western Union, Paypal, Credit Card etc.

Shipment Methods

By air, by sea, by express, as customers request.

5 FAQs of Hot-ing ceramic fiber board for furnace fire doors

People often ask questions about hot ceramic fiber boards for furnace fire doors. Here are five common ones:

What is the best way to put the board in the door?
You need to cut the board to fit the door opening exactly. Use sharp tools. Put the board against the metal door shell. Use special high-temperature glue or metal clips to hold it tight. Make sure there are no gaps. Gaps let heat escape.

How hot can this board really get?
Hot ceramic fiber boards handle very high temperatures. They work well up to 2300°F (1260°C). This is hot enough for most furnace doors. Check the exact temperature rating for your specific board. Never use it beyond its rated limit.

Will the board get damaged fast?
Good quality ceramic fiber board is tough. It resists heat and physical knocks. It doesn’t crack easily like some old firebricks. It lasts a long time under normal furnace conditions. Rough handling during installation can damage it. Be careful.

Does it seal the door well?
Yes, it seals very effectively. The board fits tightly in the door frame. This stops heat from leaking out. It keeps the furnace working efficiently. It also makes the area around the furnace safer for workers. Less heat escapes into the workspace.

Do I need to check it often?
You should look at it regularly. Check for any cracks or breaks. Look for pieces falling off. See if it’s still sitting flat against the door shell. Replace the board if you see serious damage. Regular checks help avoid bigger problems later.