Overview of 1050/1260/1350°C aluminum silicate fiber bulk, 10-50mm thick ceramic fiber board for thermal insulation

1050/1260/1350°C aluminum silicate fiber bulk, 10-50mm thick ceramic fiber board for thermal insulation is a lightweight, high-temperature insulation material composed primarily of alumina-silica. It is manufactured through a melting and spinning or blowing process, resulting in a flexible, wool-like textile. This material is engineered to provide exceptional thermal management, conserving energy and protecting equipment in extreme temperature environments across various industries.

Features of 1050/1260/1350°C aluminum silicate fiber bulk, 10-50mm thick ceramic fiber board for thermal insulation

• Excellent Thermal Stability: Withstands continuous operating temperatures up to 1260°C (2300°F) and higher for certain grades, with minimal shrinkage.

• Low Thermal Conductivity: Provides highly efficient insulation, reducing heat loss and improving energy efficiency.

• Lightweight & Low Heat Storage: Offers low thermal mass, enabling rapid heat-up and cool-down cycles for improved process control and energy savings.

• Thermal Shock Resistance: Highly resistant to damage from rapid temperature changes.

• Excellent Flexibility & Resilience: Can be fabricated into blankets, boards, papers, and textiles to fit complex shapes and applications.

• Good Chemical Stability: Resists attack from most corrosive agents, except strong alkalis and hydrofluoric acid.

Specification of 1050/1260/1350°C aluminum silicate fiber bulk, 10-50mm thick ceramic fiber board for thermal insulation

This ceramic fiber board provides strong heat insulation. It’s made from aluminum silicate fibers. These fibers handle extreme temperatures well. The board works continuously at 1050°C. It handles higher temperatures too, up to 1260°C for shorter times. Its maximum service temperature reaches 1350°C. This makes it suitable for very hot environments.

The board comes in thicknesses from 10mm to 50mm. You can choose the right thickness for your specific heat loss control. Its density is low. This low density means the board is lightweight. It’s easy to handle and install. Despite being light, the board is surprisingly tough. It resists physical damage and erosion. It keeps its shape under heat stress. This dimensional stability is important for long-term use.

Its main job is stopping heat flow. The thermal conductivity is very low. This low conductivity blocks heat transfer effectively. It saves energy. It also protects nearby equipment and structures. The board cuts easily with regular tools. You can shape it to fit complex spaces. Fixing it in place is straightforward. Use pins, washers, or high-temperature adhesive. It bonds well to surfaces.

This insulation material is safe. It contains no asbestos. It’s chemically stable. It won’t corrode most metals. Use it in many high-heat areas. It works well in furnace linings. It’s good for kiln backs and expansion joints. Use it for boiler insulation. It protects pipes carrying hot gases. It insulates heat treatment equipment effectively. It serves well in power generation plants. It’s a reliable thermal barrier.

Applications of 1050/1260/1350°C aluminum silicate fiber bulk, 10-50mm thick ceramic fiber board for thermal insulation

This aluminum silicate fiber bulk handles extreme heat. It works well up to 1350°C. People use it for stuffing gaps. They pack it around hot pipes. They fill spaces in big furnaces. It stops heat from escaping. This saves energy and money. Workers find it easy to shape and push into place. It stays put even under vibration. This material is light. It does not add much weight to structures. Its low heat storage means furnaces heat up faster. This improves production speed.

The ceramic fiber board is dense and strong. It comes in thicknesses from 10mm to 50mm. This board handles temperatures from 1050°C to 1350°C too. People use it like a rigid heat shield. They install it as furnace linings. It makes good baffles inside kilns. Factories use it for backing up firebrick. It provides a smooth surface inside hot equipment. The board resists most chemicals. It does not break down easily in harsh conditions. Cutting and shaping the board is simple on site. This makes installation quicker. Its low thermal conductivity keeps heat inside efficiently. Workers value its fireproof nature. It adds a safety layer.

Metal foundries need this insulation. Steel mills rely on it. Glass factories use it extensively. Ceramic kilns depend on its performance. Power plants install it around boilers. Petrochemical plants use it for process heaters. It protects sensitive equipment nearby. The bulk fiber fills awkward spots perfectly. The rigid board offers structural support. Both forms significantly cut heat loss. They improve worker safety near hot zones. They extend equipment life by managing temperature. They reduce furnace downtime for repairs. Choosing the right thickness and temperature rating is crucial.

Company Profile

Tanki New Materials Co.Ltd. focus on the research and development, production and sales of ceramic products, serving the electronics, ceramics, chemical and other industries. Since its establishment in 2015, the company has been committed to providing customers with the best products and services, and has become a leader in the industry through continuous technological innovation and strict quality management.

Our products includes but not limited to Aerogel, Aluminum Nitride, Aluminum Oxide, Boron Carbide, Boron Nitride, Ceramic Crucible, Ceramic Fiber, Quartz Product, Refractory Material, Silicon Carbide, Silicon Nitride, ect. please feel free to contact us.

Payment Methods

T/T, Western Union, Paypal, Credit Card etc.

Shipment Methods

By air, by sea, by express, as customers request.

5 FAQs of 1050/1260/1350°C aluminum silicate fiber bulk, 10-50mm thick ceramic fiber board for thermal insulation

Aluminum Silicate Ceramic Fiber Board: 5 Common Questions

People often ask about our aluminum silicate ceramic fiber boards. These rigid insulation slabs handle extreme heat. We answer the top questions here.

What temperatures can these boards handle?
These boards resist high heat. The standard type works up to 1050°C. Higher grades manage 1260°C or 1350°C. Check the specific product grade before buying. Match it to your furnace or equipment temperature.

Where do people usually use them?
They work well in many hot places. Use them inside furnaces and kilns. Install them as backup linings behind firebrick. They insulate boilers and exhaust systems. They shield heat in pipes and ductwork. They provide thermal breaks in metal structures.

Why choose 10-50mm thickness?
Thickness matters for insulation. Thicker boards block more heat. They offer better energy savings. Thinner boards save space. They fit tight spots easier. Pick the thickness based on your heat level and required insulation value. Consider your equipment design too.

How are these boards installed?
Installation is simple. Cut the boards to size. Use regular woodworking tools. Wear a dust mask while cutting. Fix the boards securely. Use metal anchors or high-temperature adhesive. Ensure the surface is clean and flat. Follow the manufacturer’s guide closely.

Are there safety precautions?
Handle the boards carefully. Fibers may irritate skin and lungs. Wear gloves and a dust mask. Wear long sleeves and safety glasses. Work in well-ventilated areas. Avoid breathing in loose fibers. Keep the work area clean. Wash exposed skin after handling.