Overview of China Manufacture Low Metal Powder Boron Carbide

China Manufacture Low Metal Powder Boron Carbide is an ultra-hard advanced ceramic, ranking as the third hardest material known after diamond and cubic boron nitride. Often referred to as “black diamond,” it is the premier choice for extreme applications requiring maximum hardness and lightweight properties, particularly in the field of ballistic armor and abrasive environments.

Features of China Manufacture Low Metal Powder Boron Carbide

• Exceptional Hardness: Possesses a hardness level near that of diamond, making it ideal for abrasive and wear-resistant applications.

• Extremely Lightweight: With a low density, it offers an outstanding strength-to-weight ratio, crucial for personal and aviation armor.

• Outstanding Ballistic Performance: The premier material for high-performance body and vehicle armor plates, capable of defeating high-velocity threats.

• High Neutron Absorption: An excellent neutron capture cross-section makes it a key material for nuclear reactor control rods and shielding.

• Excellent Chemical Resistance: Highly inert and resistant to acids and alkalis, ensuring performance in corrosive environments.

• High-Temperature Stability: Maintains its properties and structure at elevated temperatures.

Specification of China Manufacture Low Metal Powder Boron Carbide

China manufactured low metal powder boron carbide offers a reliable, high-performance material solution. This advanced ceramic powder is known for its extreme hardness. It ranks just below diamond and cubic boron nitride. This hardness makes it perfect for demanding applications. Boron carbide powder is chemically stable. It resists acids well. It also has a low density. These properties are valuable in many industries.

The powder composition is tightly controlled. Typical boron carbide (B₄C) content reaches 98% minimum. This ensures consistent performance. Total metallic impurities are kept very low. This is critical for electronics and nuclear uses. Common metal limits include iron under 0.10%, calcium under 0.05%, and magnesium under 0.05%. Silicon levels are also minimized. This low metal specification enhances purity. It improves performance in critical applications.

You get different particle size options. Choices range from ultrafine sub-micron powder up to coarse 50-micron grades. Particle size distribution is narrow. This guarantees uniformity in your final product. The powder’s theoretical density is approximately 2.52 g/cm³. The actual tap density varies. It depends on the specific particle size grade you choose. The powder appears black or dark gray. It has a fine, free-flowing consistency. This makes handling and processing easier.

This material is used for armor plating in vehicles and body armor. It stops high-velocity projectiles. It is used for abrasive water jet cutting nozzles. These nozzles last longer than alternatives. The powder serves as a grit for lapping and polishing hard materials. It is a key raw material for sintering dense boron carbide shapes. These shapes are used in seals and wear parts. The nuclear industry uses it as a neutron absorber. Its low metal content is essential here. Manufacturers provide detailed test reports. These confirm the powder meets the strict low metal specification.

Applications of China Manufacture Low Metal Powder Boron Carbide

China makes low metal boron carbide powder well. This material is super hard. It is almost as hard as diamond. That makes it very useful. Armor systems use it a lot. Body armor plates need it. Vehicle armor needs it too. It stops bullets and shrapnel effectively. It is much lighter than steel armor. Soldiers and vehicles move easier.

Abrasive industries need this powder. Sandblasting nozzles use it. These nozzles last much longer. Water jet cutting uses it too. The cutting is faster and cleaner. Low metal means fewer impurities. This stops clogs and wear. Production runs smoother.

Industrial wear parts benefit greatly. Seals and bearings face friction constantly. Boron carbide powder makes them tougher. They resist scratching and erosion. Factories save money. They replace parts less often. Machines run longer.

Nuclear power plants use it. Control rods manage nuclear reactions. Boron carbide absorbs neutrons efficiently. Low metal content is critical here. It prevents unwanted reactions. Safety improves. Reactor control is more reliable.

Grinding and lapping need fine abrasives. Boron carbide powder works for this. It polishes hard materials smoothly. Tungsten carbide and ceramics get polished. The finish is high quality. Surface flaws reduce. Tool performance increases.

China produces this powder cost-effectively. Factories use advanced methods. Quality control is strict. The powder is consistent batch after batch. Buyers get a reliable product. It meets international standards. Industries worldwide trust it. It performs under tough conditions.

Company Profile

Tanki New Materials Co.Ltd. focus on the research and development, production and sales of ceramic products, serving the electronics, ceramics, chemical and other industries. Since its establishment in 2015, the company has been committed to providing customers with the best products and services, and has become a leader in the industry through continuous technological innovation and strict quality management.

Our products includes but not limited to Aerogel, Aluminum Nitride, Aluminum Oxide, Boron Carbide, Boron Nitride, Ceramic Crucible, Ceramic Fiber, Quartz Product, Refractory Material, Silicon Carbide, Silicon Nitride, ect. please feel free to contact us.

Payment Methods

T/T, Western Union, Paypal, Credit Card etc.

Shipment Methods

By air, by sea, by express, as customers request.

5 FAQs of China Manufacture Low Metal Powder Boron Carbide

People ask what boron carbide powder is. It’s a super hard ceramic material. China makes a special version with very low metal content. This means fewer impurities like iron or aluminum. High purity matters for many uses.

People ask why low metal content is important. Metal traces can cause problems. They might weaken final products. They might create sparks in sensitive processes. Low metal powder performs better in critical applications. It gives more reliable results.

People ask where this powder gets used. It goes into bulletproof armor because it stops bullets well. It serves as an abrasive for cutting or grinding very hard materials. It works in nuclear reactors as a control rod material. It helps make other super-hard ceramics too. The low metal grade is needed for these jobs.

People ask about particle sizes available. Factories offer many sizes. You can get very fine powders. You can get coarser grits. Common sizes include 1 micron, 5 microns, 20 microns, and 80 mesh. The right size depends on your specific need. Tell suppliers your requirement.

People ask if it’s safe to handle. Handle boron carbide powder carefully. Avoid breathing the dust. Use good ventilation. Wear a proper dust mask. Wear gloves. It is generally stable but treat fine powders with respect. Keep it away from strong acids or alkalis unless your process requires it. Store it dry.