Overview of 2018 factory-made ceramic fiber products

2018 factory-made ceramic fiber products is a lightweight, high-temperature insulation material composed primarily of alumina-silica. It is manufactured through a melting and spinning or blowing process, resulting in a flexible, wool-like textile. This material is engineered to provide exceptional thermal management, conserving energy and protecting equipment in extreme temperature environments across various industries.

Features of 2018 factory-made ceramic fiber products

• Excellent Thermal Stability: Withstands continuous operating temperatures up to 1260°C (2300°F) and higher for certain grades, with minimal shrinkage.

• Low Thermal Conductivity: Provides highly efficient insulation, reducing heat loss and improving energy efficiency.

• Lightweight & Low Heat Storage: Offers low thermal mass, enabling rapid heat-up and cool-down cycles for improved process control and energy savings.

• Thermal Shock Resistance: Highly resistant to damage from rapid temperature changes.

• Excellent Flexibility & Resilience: Can be fabricated into blankets, boards, papers, and textiles to fit complex shapes and applications.

• Good Chemical Stability: Resists attack from most corrosive agents, except strong alkalis and hydrofluoric acid.

Specification of 2018 factory-made ceramic fiber products

2018 factory-made ceramic fiber products supplied high-temperature solutions. These materials were created for severe warm settings. Typical kinds included alumina-silica based fibers. They supplied strong insulation versus thermal transfer.

These ceramic fibers handled constant temperatures approximately 1260 ° C. They could withstand short-term optimals also greater. This made them suitable for heating systems, kilns, and central heating boilers. The fibers stood up to direct flame call well.

Different item thickness were offered. Lower thickness variations used far better insulation per inch. Higher thickness variations supplied better resilience and strength. Individuals selected thickness based upon details application needs.

Ceramic fiber came in numerous kinds. Coverings were versatile and simple to install. Boards supplied stiff insulation for walls or floors. Modules were pre-formed shapes for complicated heating system linings. Papers and felts served for gasketing or wrapping pipelines.

Thickness choices differed widely. Basic blanket thicknesses varied from 1/4 inch to 3 inches. Custom thicknesses were possible for unique projects. The appropriate thickness depended on warmth levels and energy savings objectives.

These fibers withstood chemical strike from numerous atmospheres. They were not influenced by oils or solvents. They revealed great resistance to weak acids and alkalis. Strong acids or alkalis might create damage gradually.

Mechanical residential properties included reduced thermal conductivity. This implied warm moved gradually through the material. They had reduced heat storage capacity also. The fibers supplied good tensile toughness for managing and installment.

Applications of 2018 factory-made ceramic fiber products

Ceramic fiber products made in factories back in 2018 discovered several uses. They are wonderful for maintaining warm inside things. Individuals utilize them a whole lot to shield heaters and stoves in manufacturing facilities. This conserves energy since much less warmth escapes. It additionally makes the equipment last longer. Employees can handle the outdoors surfaces easier since they remain cooler. These items are light. This makes putting them in place much easier than using hefty bricks. They are likewise strong versus sudden temperature level changes. This assists stop splits from developing.

An additional crucial work is securing voids. Ceramic fiber items work well as gaskets. You see them around doors on high-temperature furnaces. They stop warm and flames from leaking out. This is essential for safety and security. It likewise maintains the furnace working successfully. They benefit lining pipes carrying warm gases. This stops warm loss with the pipeline wall surfaces. It protects the pipelines too.

Fire protection is one more essential location. These ceramic fiber blankets and boards are made use of as fire barriers. They go inside walls or around frameworks. If a fire happens, they decrease the spread. This offers people even more time to go out safely. It likewise helps protect the building itself. They resist very high temperatures without catching fire themselves.

The vehicle market uses them as well. You discover ceramic fiber items around exhaust systems. They assist maintain heat in the exhaust gases. This aids the catalytic converter job much better. It can likewise safeguard other vehicle components from getting as well warm. They are made use of near engines and turbochargers for the very same reason. They handle the engine’s heat well.

Company Profile

Tanki New Materials Co.Ltd. focus on the research and development, production and sales of ceramic products, serving the electronics, ceramics, chemical and other industries. Since its establishment in 2015, the company has been committed to providing customers with the best products and services, and has become a leader in the industry through continuous technological innovation and strict quality management.

Our products includes but not limited to Aerogel, Aluminum Nitride, Aluminum Oxide, Boron Carbide, Boron Nitride, Ceramic Crucible, Ceramic Fiber, Quartz Product, Refractory Material, Silicon Carbide, Silicon Nitride, ect. please feel free to contact us.

Payment Methods

T/T, Western Union, Paypal, Credit Card etc.

Shipment Methods

By air, by sea, by express, as customers request.

5 FAQs of 2018 factory-made ceramic fiber products

What’s the highest heat ceramic fiber handles?
Ceramic fiber products stand up to really high temperatures. Most handle constant heat around 2300°F. Some special types go even higher, near 2600°F. Check the specific product’s rating. It tells you the exact limit.

Is ceramic fiber safe to use?
Handle ceramic fiber carefully. Tiny fibers can get in the air. Breathing them in is bad. It might cause lung problems later. Long-term exposure links to certain cancers. Workers need masks, gloves, and goggles. Always follow safety rules.

How do I install ceramic fiber?
Installation depends on the product form. Boards get cut to size. Fit them tightly together. Blankets get layered or rolled out. Use special clips or pins to hold them. Wear protective gear the whole time. Keep the work area clean.

How long does ceramic fiber last?
Ceramic fiber lasts a long time in heat. It doesn’t rot or break down like some materials. Physical damage or bad weather can shorten its life. Proper installation helps it last longer. Check it sometimes for wear.

Are there better options than ceramic fiber?
Ceramic fiber is a top choice for high heat insulation. Other materials exist, like calcium silicate or refractory bricks. These alternatives might be heavier or cost more. Ceramic fiber stays lightweight and efficient. It fits many industrial needs well.