Overview of 2-inch ceramic fiber board

2-inch ceramic fiber board is a lightweight, high-temperature insulation material composed primarily of alumina-silica. It is manufactured through a melting and spinning or blowing process, resulting in a flexible, wool-like textile. This material is engineered to provide exceptional thermal management, conserving energy and protecting equipment in extreme temperature environments across various industries.

Features of 2-inch ceramic fiber board

• Excellent Thermal Stability: Withstands continuous operating temperatures up to 1260°C (2300°F) and higher for certain grades, with minimal shrinkage.

• Low Thermal Conductivity: Provides highly efficient insulation, reducing heat loss and improving energy efficiency.

• Lightweight & Low Heat Storage: Offers low thermal mass, enabling rapid heat-up and cool-down cycles for improved process control and energy savings.

• Thermal Shock Resistance: Highly resistant to damage from rapid temperature changes.

• Excellent Flexibility & Resilience: Can be fabricated into blankets, boards, papers, and textiles to fit complex shapes and applications.

• Good Chemical Stability: Resists attack from most corrosive agents, except strong alkalis and hydrofluoric acid.

Specification of 2-inch ceramic fiber board

Ceramic fiber board is a lightweight insulating material. It handles high temperatures well. This 2-inch thick board offers strong thermal protection. Its main job is to reduce heat loss.

This board is made from alumina-silica ceramic fibers. The fibers are mixed with binders. Then they are formed into boards under pressure. Finally, the boards are dried and hardened. This creates a solid but manageable product.

The board feels rigid. You can cut it easily. Sawing or shearing works fine. This makes fitting simple during installation. You can shape it for different spaces.

Its key feature is resisting high heat. It works continuously up to 2300°F. Short bursts can hit even higher. This makes it suitable for many hot environments. It prevents heat from escaping effectively. Energy savings are a major benefit.

The board has low thermal conductivity. This means heat doesn’t pass through it easily. Heat stays where you want it. Furnace linings use it often. Kilns and boilers also benefit. It lines high-temperature pipes too. It protects sensitive equipment nearby.

The material handles thermal shock well. Fast temperature changes don’t damage it. It expands very little when heated. This avoids stress on surrounding structures. It lasts longer under tough conditions.

This ceramic fiber board is chemically stable. Most acids and bases don’t affect it. It stays intact in corrosive atmospheres. It doesn’t rot or decay over time. It performs consistently.

The board is also lightweight. It puts less stress on support structures. Installation is simpler. Handling is easier than dense bricks. It saves space too compared to bulkier insulation.

You often see it in industrial settings. Furnace and oven linings are common uses. Boiler insulation relies on it. Fire protection systems incorporate it. It backs up refractory bricks. It shields heat-sensitive components. Its versatility is clear.

This 2-inch ceramic fiber board provides reliable insulation. It manages heat effectively. It lasts in demanding applications.

Applications of 2-inch ceramic fiber board

These thick 2-inch ceramic fiber boards are insulation powerhouses. They stop heat very well. This helps save energy in hot places. They handle extremely high temperatures easily. Many furnaces and ovens rely on them inside. They sit right behind the hot furnace walls. This protects the outer steel structure. The boards keep the heat inside the furnace working area. This boosts efficiency. Kilns also use them a lot. They help control the kiln’s temperature evenly. This is important for firing ceramics properly.

Boilers benefit from them too. They insulate boiler casings effectively. This lowers the outer surface temperature. It makes the workplace safer. It also cuts down heat loss. They are common in power plants. They insulate ducts and piping carrying hot gases. The boards prevent heat from escaping into the plant. Heat treatment equipment uses these boards. They line furnaces for annealing or hardening metal. The boards maintain stable, uniform heating zones.

They are lightweight compared to old brick linings. This reduces stress on the furnace structure. Installation is often simpler. Cutting and shaping them is straightforward. They serve as a backup layer behind firebricks. This adds extra insulation. It also helps the whole refractory system last longer. In some setups, they are the main heat-resistant material. They form the insulating layer directly against the heat.

They are excellent for fire protection. They help insulate structural steel beams and columns. This keeps them cooler longer during a fire. They are used in fire doors and partitions. They block heat transfer effectively. The boards withstand direct flames. They offer good thermal protection. They find use in petrochemical settings. They insulate reactors and vessels processing hot materials. They are valued for their heat resistance and low heat storage.

Company Profile

Tanki New Materials Co.Ltd. focus on the research and development, production and sales of ceramic products, serving the electronics, ceramics, chemical and other industries. Since its establishment in 2015, the company has been committed to providing customers with the best products and services, and has become a leader in the industry through continuous technological innovation and strict quality management.

Our products includes but not limited to Aerogel, Aluminum Nitride, Aluminum Oxide, Boron Carbide, Boron Nitride, Ceramic Crucible, Ceramic Fiber, Quartz Product, Refractory Material, Silicon Carbide, Silicon Nitride, ect. please feel free to contact us.

Payment Methods

T/T, Western Union, Paypal, Credit Card etc.

Shipment Methods

By air, by sea, by express, as customers request.

5 FAQs of 2-inch ceramic fiber board

People often ask about 2-inch ceramic fiber board. Here are common questions and their answers.

Why choose 2-inch thickness?
This thickness offers strong insulation. It works well for high heat. Thinner boards might not block enough heat. Thicker boards add more cost and weight. Two inches is a good middle point for many uses.

How hot can it get?
These boards handle very high temperatures. They are rated for continuous use around 2300°F. They can handle even higher heat for short bursts. Check the exact rating from the maker. The board should not exceed its limit.

Can I cut or shape it?
Yes, you can cut it. Use regular woodworking tools. Wear a mask because dust is bad to breathe. The board is stiff but you can trim it. You can also drill holes if needed. Fit it into different spaces easily.

Is it good insulation?
Yes, it insulates heat very well. It stops heat from moving through walls or pipes. This saves energy. It keeps heat inside furnaces or kilns. It also protects nearby areas from getting too hot. The fiber structure traps heat effectively.

Where do I use it?
Use it in hot places. Examples are furnaces, boilers, and ovens. Put it behind heating elements. Line fireboxes with it. It fits well in industrial equipment. It is also good for backup insulation in fire protection. It works anywhere needing strong heat resistance.