The properties, preparation and application of iron oxide Fe3O4 powder

Overview of iron oxide Fe3O4

Iron oxide (II, III) (Fe3O4) iron oxide can also be made into particles, blocks, powders, sputtering targets, tablets and nano-powders. In most cases, iron oxide is usually available immediately. High-purity, sub-micron and nano-powder forms can be considered. Provide other technical, research, and security (MSDS) information. Fe3O4 is formed by Schikorr reaction. This reaction converts iron (II) hydroxide (Fe(OH)2) to iron oxide (II,III) (Fe3O4). Under anaerobic conditions, ferrous hydroxide (Fe(OH)2) is oxidized in water to form magnetite and molecular hydrogen. Skicor's reaction explained the process.

3Fe(OH)2 → Fe3O4 + H2 + 2H2O

Hydroxide magnetite hydrogen water.

Iron oxide is an inorganic substance with a chemical formula of Fe3O4. It is a magnetic black crystal, so it is also called magnetic iron oxide.

Iron oxide Fe3O4 powder properties

Iron oxide is insoluble in organic solvents such as water, alkaline solutions, ethanol and ether. The natural ferric oxide is insoluble in acid solution and is easily oxidized to iron oxide (Fe2O3) in humid air.

Black Fe3O4 is a mixed valence oxide of iron with a melting point of 1597°C and a density of 5.18g/cm3. Fe3O4 powder is insoluble in water but soluble in acid solution. It appears in the form of magnetite in nature at room temperature. It has strong submagnetism and high conductivity.

Fe3O4 has anti-corrosion effect. For example, the bluing of steel parts (also known as burning blue, baking blue) is to use the oxidation effect of alkaline oxidizing solution to form a blue-black or dark blue Fe3O4 film on the surface of the steel parts. Used to increase corrosion resistance, gloss and aesthetics.

Preparation of iron oxide Fe3O4 powder

The traditional methods for preparing nano-Fe3O4 mainly include precipitation method, hydrothermal (solvothermal) method, microemulsification method and sol-gel method.

1. Precipitation method

The precipitation method has simple process operation, low cost, high product purity and uniform composition. It is the most commonly used method for preparing nanoparticles and is suitable for large-scale production. Common precipitation methods include co-precipitation, hydrolytic precipitation, ultrasonic precipitation, alkoxide hydrolysis and chelate decomposition.

2. Hydrothermal (solvothermal) method

Hydrothermal (solvothermal) reaction is a general term for chemical reactions carried out in fluids such as aqueous solutions (organic solvents) or steam at high temperature and pressure. The Fe3O4 prepared by the hydrothermal method has small particle size and relatively uniform particle size, does not require high-temperature calcination pretreatment, and can realize the doping of multivalent ions.

Application of iron oxide Fe3O4

Iron oxide Fe3O4 powder, usually called iron oxide black, magnetite and iron oxide black, can be used in many different fields, for example: iron oxide (II, III) is used as a black pigment, also known as Martian black.

Used as a catalyst in the Haber process.

Used for water gas shift reaction.

In contrast, Fe3O4 nanoparticles are used for MRI scans.

It can prevent steel from rusting.

It is a component in aluminate, used for cutting steel.

Iron oxide Fe3O4 powder has ferromagnetism, if the particle radius formed is at the nanometer level, it is called ferromagnetic particles.

1. It can produce magnetic recording materials, high gradient magnetic separators, microwave absorbing materials, and special coatings.

2. It is widely used as a carrier of various pharmaceutical ingredients to form a magnetic targeted drug delivery system; used for the separation of magnetic immune cells and nuclear magnetic resonance imaging.

3. Used for precision instruments, gas sealing, vacuum sealing, etc.

Iron oxide Fe3O4 price

The price of iron oxide Fe3O4 powder will vary randomly with factors such as production cost, transportation cost, international situation, and market supply and demand of iron oxide Fe3O4 powder. Tanki New Materials Co., Ltd. aims to help various industries and chemical wholesalers find high-quality, low-cost nanomaterials and chemicals by providing a full set of customized services. If you are looking for iron oxide Fe3O4 powder, please feel free to send an inquiry to get the latest price. Iron oxide Fe3O4 powder

Suppliers of iron oxide Fe3O4

As a global supplier of iron oxide Fe3O4, Tanki New Materials Co., Ltd. has extensive experience in the performance, application and cost-effective manufacturing of advanced engineering materials. The company has successfully developed a series of powder materials (including boron carbide, aluminum carbide, titanium carbide, etc.), high-purity targets, functional ceramics and structural devices, and provides OEM services.