What is a foam generator?

What is a foam generator?

Regardless of the foam generator, the basic principle of foaming is to introduce air into the foaming agent solution. Various changes are different in the way of introducing gas, so the effect is also different.

There are two necessary factors for the formation of foam, one is the foaming agent solution, and the other is air. Both are indispensable. If there is no blowing agent solution, the liquid film around the gas will not form, and no bubbles will be generated. And without gas, the blowing agent solution alone cannot form bubbles.

In the bubble formation system, the blowing agent solution is the dispersion medium, the gas is the dispersed phase, and the gas is dispersed in the liquid to form bubbles, and then countless bubbles form bubbles. In addition to the important factor of blowing agent performance, the introduction of gas into the blowing agent solution is also another important factor. The principle of the foam generator is to introduce gas into the liquid, that is, the foam generator uses a certain method to introduce the gas into the liquid. Different foaming machines have different methods of introducing gas. Generally speaking, there are several ways to introduce gas into the foaming machine:

(1) Slowly rotating blades introduce gas. This is a method of directly injecting gas into the mortar (or concrete slurry) mixed with cement foaming agent. When the mixer blades push the slurry, air enters the slurry through the mixer blades. In addition, a large amount of air is wrapped in the slurry when the slurry is turned over, and a part of the air is carried into the slurry by the cement and aggregate. The sum of the three is the total amount of air entering the slurry. Among them, the air brought into the slurry by the stirring blades and the air wrapped by the rotating blades occupy the main body.

After the air enters the slurry, the liquid containing the foaming agent surfactant surrounds the air, forming a double-electron layer liquid film at the interface between the air and the liquid, and finally forms bubbles in the slurry in the form of air—liquid.

Due to the slow speed of the blades, less gas is introduced in this way, the amount of bubbles generated is small, the foaming effect is not good, and the efficiency is low.

(2) High-speed rotating blades introduce gas. This is a method that relies on high-speed rotating blades to introduce gas into the blowing agent solution. The introduction of gas mainly depends on the force of the rotating blades. This type of blade generally requires high-speed rotation, the speed should be> 700 rpm, generally between 700 and 1400 r/min, and the peripheral speed of the impeller end should be> 20 m/s to obtain satisfactory results. A certain high speed can expose the impeller to liquid , Contact with air, and introduce air. If the speed is too low, the impeller will not be exposed to the liquid and the bleed air volume will be very low. The proper speed should be lower than the speed at which the impeller is exposed when the liquid rotates.

(3) Use pressure to introduce gas. This is currently the most commonly used advanced aerated foaming method at home and abroad. It is also a more scientific method of entraining air. It is the core of high-pressure and medium-pressure foam generator technology for foamed concrete.

The above two methods are slow and uneven, and the bubble diameter is large, especially the bubble diameter cannot be controlled. It completely depends on the randomness of the foaming machine, and cannot guarantee small bubble diameter and uniform foaming. The most critical technical indicators. At the same time, the amount of foaming is difficult to control.

In order to effectively solve the above problems, the entrainment foaming method came into being. Whether in terms of foaming volume, foaming speed, foaming diameter, foaming uniformity, etc., they have reached a new level and made great technological progress. The main principle is to use various equipment that can generate air pressure to press air into the liquid phase to achieve uniform mixing of the two phases. Under normal pressure, it is difficult for air to enter the liquid, but under certain pressure, it becomes easier. This pressure not only presses the gas into the liquid, but also presses the liquid into the gas. In fact, it applies pressure at the same time. In this way, the mixing of the two phases will be fast, efficient, uniform, and the bubbles will be fine, meeting the ideal foam technical requirements

Foam concrete foam generator price

The CLC foaming machine market has random changes in the supply and demand of foam concrete foam generators. Tanji New Materials Co., Ltd. aims to help various industries and chemical wholesalers find high-quality, low-cost nanomaterials and chemicals by providing a full set of customized services. If you are looking for a foam concrete foam generator, please feel free to send an inquiry to get the latest price

Supplier of Foam Concrete Foam Generator

As a global foam concrete foam generator supplier, Tanki New Materials Co., Ltd. has extensive experience in the performance, application and cost-effective manufacturing of advanced and engineered materials. The company has successfully developed a series of powder materials (molybdenum disilicide, lanthanum nitride (LaN powder, calcium silicide, iron boride), high-purity targets, functional ceramics and structural devices, and provides OEM services.