Overview of High-Electrical Resistance Alumina Ceramic Rod Aluminum Oxide Ceramic Shaft for Electroplating Equipment

High-Electrical Resistance Alumina Ceramic Rod Aluminum Oxide Ceramic Shaft for Electroplating Equipment are one of the most widely used and versatile technical ceramics, prized for their excellent combination of properties. Composed primarily of aluminum oxide (Al₂O₃), they offer outstanding hardness, wear resistance, and electrical insulation, even at high temperatures. From low-purity grades for general industrial use to high-purity compositions for demanding applications, alumina ceramics provide a cost-effective and reliable solution across a vast range of industries.

Features of High-Electrical Resistance Alumina Ceramic Rod Aluminum Oxide Ceramic Shaft for Electroplating Equipment

• High Hardness & Wear Resistance: Excellent resistance to abrasive wear, making it ideal for liners, nozzles, and guides.

• Superior Electrical Insulation: Maintains high electrical resistivity and dielectric strength, even at elevated temperatures.

• Excellent Thermal Stability: Withstands high operating temperatures and exhibits good thermal conductivity.

• High Mechanical Strength: Possesses good compressive strength and stiffness.

• Chemical Inertness: Resists corrosion from a wide range of acids, alkalis, and other harsh chemicals.

• Cost-Effectiveness: A highly versatile and economically efficient ceramic material for numerous applications.

Specification of High-Electrical Resistance Alumina Ceramic Rod Aluminum Oxide Ceramic Shaft for Electroplating Equipment

Alumina ceramic rods are vital parts in electroplating gear. These poles are made from light weight aluminum oxide. They are unbelievably difficult and resilient. They deal with severe problems very well. Electroplating containers use electricity and strong chemicals. These rods have to stand up to both. They provide high electrical resistance. This residential property is important. It quits unwanted electric flow. It maintains the electroplating procedure accurate. The rods overview or assistance steel racks. The racks hold components being layered.

The material is almost pure light weight aluminum oxide. It is usually 99% Al ₂ O FOUR. This purity offers exceptional properties. The rods are very dense and difficult. They withstand scratches and wear. They stay smooth for a very long time. They are additionally extremely steady chemically. Acids and antacids do not harm them easily. This means they last much longer in plating baths. You will not need to change them typically. They conserve money over time.

These poles handle high warm well. They can endure temperature levels over 1500 ° C. Sudden temperature modifications do not break them. This thermal shock resistance is important. Layering procedures can include heating or cooling. The poles maintain their shape and stamina. They do not split quickly. Their electrical insulation remains solid. This guarantees regular plating results. Operators count on this uniformity.

The rods are available in different dimensions. Common sizes range from 3mm to 50mm. Lengths can be a number of hundred millimeters. Custom dimensions are usually possible. The surface is extremely smooth. This reduces rubbing with racks. It prevents damage to parts. The shade is normally white or off-white. The rods are straight and accurate. They fit flawlessly right into tools layouts. Their high strength supports heavy lots. They are excellent for requiring industrial jobs.

Applications of High-Electrical Resistance Alumina Ceramic Rod Aluminum Oxide Ceramic Shaft for Electroplating Equipment

Alumina ceramic rods are vital in electroplating devices. They are made from light weight aluminum oxide. This product provides very high electrical resistance. This home is critical for electroplating. Electroplating usages electrical current to deposit steel onto components. The rods work as insulators. They quit stray currents from reaching areas that must not be plated. This makes certain plating just happens where meant. This boosts product quality. It minimizes scrap components. It conserves products and cash. These rods are chemically inert. They withstand rough plating chemicals like acids and bases. This prevents rust. The rods remain strong over time. They manage high temperatures well. Electroplating bathrooms can fume. The rods keep their form and stamina. They are really hard. This provides exceptional wear resistance. They don’t weaken conveniently. This implies longer service life. Less downtime is needed for substitutes. The rods supply dependable electric seclusion. Constant plating results are attained. Parts get an also finish. They are used as support bars and shafts. They hold shelfs lugging components into the plating bath. Their insulation maintains present courses regulated. Surface surfaces meet requirements. Production efficiency rises.

Company Profile

Tanki New Materials Co.Ltd. focus on the research and development, production and sales of ceramic products, serving the electronics, ceramics, chemical and other industries. Since its establishment in 2015, the company has been committed to providing customers with the best products and services, and has become a leader in the industry through continuous technological innovation and strict quality management.

Our products includes but not limited to Aerogel, Aluminum Nitride, Aluminum Oxide, Boron Carbide, Boron Nitride, Ceramic Crucible, Ceramic Fiber, Quartz Product, Refractory Material, Silicon Carbide, Silicon Nitride, ect. please feel free to contact us.

Payment Methods

T/T, Western Union, Paypal, Credit Card etc.

Shipment Methods

By air, by sea, by express, as customers request.

5 FAQs of High-Electrical Resistance Alumina Ceramic Rod Aluminum Oxide Ceramic Shaft for Electroplating Equipment

Customers often ask about our high-resistance alumina ceramic rods. Here are five common questions and their answers.

What are these rods made of? They are pure aluminum oxide ceramic. This material gives them excellent electrical insulation properties. They block current flow effectively. This makes them ideal for electroplating racks.

Why use alumina ceramic instead of metal? Metals conduct electricity. Alumina ceramic does not conduct electricity. This insulation prevents stray currents in the tank. It protects the plating process. It ensures a more uniform coating on your parts.

Can these rods handle tough chemicals? Yes. Alumina ceramic resists most acids and alkalis. Electroplating baths are harsh. Our rods withstand these conditions well. They last longer than other materials. They won’t corrode or contaminate your bath.

Do they tolerate high temperatures? Absolutely. Alumina ceramic works at very high heat. It remains stable over 1600°C. Electroplating solutions sometimes get hot. Furnace environments are extreme. These rods perform reliably there.

Can we get custom sizes? Yes. We offer many standard diameters and lengths. We also make rods to your exact drawings. Tell us your dimensions. We will manufacture them for you.