Overview of High-temperature thermal insulation ceramic Fiber Board/Marine Power Plant Ceramic Fiber for

High-temperature thermal insulation ceramic Fiber Board/Marine Power Plant Ceramic Fiber for is a lightweight, high-temperature insulation material composed primarily of alumina-silica. It is manufactured through a melting and spinning or blowing process, resulting in a flexible, wool-like textile. This material is engineered to provide exceptional thermal management, conserving energy and protecting equipment in extreme temperature environments across various industries.

Features of High-temperature thermal insulation ceramic Fiber Board/Marine Power Plant Ceramic Fiber for

• Excellent Thermal Stability: Withstands continuous operating temperatures up to 1260°C (2300°F) and higher for certain grades, with minimal shrinkage.

• Low Thermal Conductivity: Provides highly efficient insulation, reducing heat loss and improving energy efficiency.

• Lightweight & Low Heat Storage: Offers low thermal mass, enabling rapid heat-up and cool-down cycles for improved process control and energy savings.

• Thermal Shock Resistance: Highly resistant to damage from rapid temperature changes.

• Excellent Flexibility & Resilience: Can be fabricated into blankets, boards, papers, and textiles to fit complex shapes and applications.

• Good Chemical Stability: Resists attack from most corrosive agents, except strong alkalis and hydrofluoric acid.

Specification of High-temperature thermal insulation ceramic Fiber Board/Marine Power Plant Ceramic Fiber for

This is high-temperature thermal insulation ceramic fiber board. It handles extreme heat. It withstands temperatures up to 1260°C. This material works well in marine power plants. It saves energy. It cuts heat loss significantly. The board is made from pure ceramic fibers. These fibers resist chemicals. They handle tough marine conditions. The board is light. Its density is low, typically 260-400 kg/m³. This makes installation easier. It puts less stress on structures. It comes in different thicknesses. Common sizes are 10mm, 20mm, 30mm, and 50mm. You can cut it to fit specific needs. The board has low thermal conductivity. Heat doesn’t pass through it easily. This provides strong insulation. It keeps heat inside equipment. It protects surrounding areas. It improves safety. The board is strong. Its compressive strength is good, around 1000 kg/m³. It holds up under pressure. It lasts a long time. It withstands thermal shocks. Rapid temperature changes don’t damage it. This is vital for marine engines. Engines often start and stop quickly. The board is easy to install. Workers can cut it with simple tools. They can shape it on site. It fits pipes, boilers, and exhaust ducts well. It saves space. Marine applications have limited room. This insulation takes up little area. It replaces bulkier options. It lowers fuel costs. Better insulation means engines work less hard. It reduces maintenance needs. Equipment stays cooler longer. This ceramic fiber board is reliable. It performs consistently in marine environments. Salt air and moisture don’t affect it much. It is a smart choice for ship power systems. It suits engine rooms and exhaust systems. It handles the heat and harsh conditions.

Applications of High-temperature thermal insulation ceramic Fiber Board/Marine Power Plant Ceramic Fiber for

This product is high-temperature thermal insulation ceramic fiber board. It is made for marine power plants. It handles extreme heat very well. This material insulates hot equipment. It keeps heat inside machinery. This saves energy. Ships need efficient power. This board helps.

Marine power plants use boilers. Boilers get very hot. This board wraps around boilers. It stops heat loss. Workers stay safer too. Hot surfaces are dangerous. The board shields them. Heat stays where it should.

Exhaust systems are another use. Hot gases flow through ducts. Insulation is vital here. The ceramic fiber board lines these ducts. It keeps the heat contained. Efficiency improves. Fuel consumption reduces.

Turbines operate at high temperatures. Insulation protects them. The board provides steady thermal protection. Temperature control is better. Equipment lasts longer. Maintenance needs decrease.

Fire safety is critical on ships. This material is non-combustible. It resists fire. It adds a safety layer. Risk lowers. The board is light. Installation is easier. Structural load is less. It withstands vibration. Marine environments are tough. The board holds up.

Chemical resistance is good. Harsh conditions don’t damage it. Performance stays reliable. Thermal stability is excellent. Properties don’t fade over time. Long service life is a key benefit.

Company Profile

Tanki New Materials Co.Ltd. focus on the research and development, production and sales of ceramic products, serving the electronics, ceramics, chemical and other industries. Since its establishment in 2015, the company has been committed to providing customers with the best products and services, and has become a leader in the industry through continuous technological innovation and strict quality management.

Our products includes but not limited to Aerogel, Aluminum Nitride, Aluminum Oxide, Boron Carbide, Boron Nitride, Ceramic Crucible, Ceramic Fiber, Quartz Product, Refractory Material, Silicon Carbide, Silicon Nitride, ect. please feel free to contact us.

Payment Methods

T/T, Western Union, Paypal, Credit Card etc.

Shipment Methods

By air, by sea, by express, as customers request.

5 FAQs of High-temperature thermal insulation ceramic Fiber Board/Marine Power Plant Ceramic Fiber for

What temperatures can marine ceramic fiber boards handle? They handle temperatures up to 2300°F (1260°C). This makes them perfect for insulating hot equipment like boilers and pipes inside ship engine rooms. They keep the heat inside the system effectively.

How do you install these boards? Installing them is straightforward. You can glue them directly onto the metal surfaces needing insulation. You can also bolt them into place using special washers. This flexibility helps fit them into the tight spaces found on ships.

Can they handle ship vibrations? Yes. The ceramic fiber material is strong but also somewhat flexible. This means it doesn’t crack or break easily when the ship moves or the engines run. The boards stay intact and keep insulating properly over time.

Do these boards resist moisture? They do resist moisture well. The boards are made from inorganic ceramic fibers. This means they don’t soak up water like some other insulation materials might. They won’t rot or degrade quickly in the damp marine environment.

Is thicker board always better insulation? Thicker boards do generally provide better insulation. But space is very limited inside ships. Often, a thinner board offers enough insulation performance while saving crucial space. The right thickness depends on the specific heat levels and the space available.