EBS ethylene bisstearamide emulsion

Overview of EBS ethylene bis-stearamide emulsion:

EBS Ethylene Bis Steramide emulsion is a white emulsion. Ebs Ethylene Bis Steramide is a hard and brittle white high melting point wax. Its industrial product is yellowish fine particles, non-toxic, and has no side effects on the human body. It is insoluble in most solvents at room temperature and can stabilize acid, alkali and water. Soluble in hydrocarbons and aromatic hydrocarbon solvents, strong powder, compound with water wettability above 80 degrees.

EBS is the abbreviation of Ethylene Bis Steramide. It is a high melting point synthetic wax. The two-pole bond maintains a high balance. Its inherent structure exerts unique compatibility and solubility. It can be used as most thermosetting and thermoplastic plastics. Lubricants and external lubricants are good pigment dispersants, which make the operation smooth and improve the quality of the final product.

Ebs Ethylene Bis Steramide is a newly developed plastic lubricant, which is widely used in the molding of PVC products, ABS, high-resistance polystyrene, polyolefin, rubber, plastic products, and is related to traditional lubricants such as paraffin wax. Compared with lubricants such as polyethylene wax and stearate, it not only has good external lubricity, but also has good internal lubricity. It improves the fluidity and mold release of molten plastic during plastic molding. Thereby improving the yield of plastic processing, reducing energy consumption, and the product has a high surface finish and smoothness.

EBS ethylene bis-stearamide emulsion application:

What is the scope of application of EBS vinyl bis-stearamide emulsion?

EBS ethylene bis-stearamide emulsion is a white emulsion, the product is non-toxic, non-polluting, non-hazardous, and environmentally friendly. It is easy to disperse in water and has the characteristics of ultra-fineness, low viscosity, good dispersibility and compatibility. 

1. Plastic

Among many thermoplastic and thermosetting plastics, as internal and external sliding agents, the most representative ones are ABS, PS, AS, PVC, as well as PE, PP, PVAC, Cellulose, Accurate, and Nylon, Phenolic resin, amino plastic, etc, with good coating and mold release performance.

In thermoplastic PUR injection molding,the additive doubles as an internal mold release agent.

As a polymethylene bay agent, it can increase the melt flow rate, improve the whiteness, thermal stability and physical index of polyformaldehyde, and improve the physical index.

2. Rubber

Synthetic resin and rubber, polychloroprene, GRS (SBR) have good anti-adhesion and anti-adhesion effects. EBS is used in automobile floor mats, drainage pipes and other rubber products to increase the surface gloss effect.

3. Chemical fiber

EBS can increase the heat resistance and fluidity of polyester and nylon fibers, and impart a certain antistatic effect.

4. Type

Phenolic resin was added to the casting sand, and EBS was added as a demonstration agent.

5. Pigment, filler dispersant

EBS is plastic. Pigment dispersant for chemical fiber matrix such as ABS, PS, polypropylene and polyester pellets.

EBS can also be used as a coating powder for plastic coloring.

6. Powder coating

EBS can be used as a liquid additive for powder coatings.

7. Paint, ink

Improve the salt spray and moisture-proof effect when making paint and paint. Adding this product to the paint can improve the agent release performance and increase the level of the porcelain surface.

It can be used as furniture polish and printing ink.

8. Other uses

Melting point of petroleum products,

Lubricants and corrosives in the process of metal wire processing, potting materials for electrical components,

The above is the composition of papermaking agent and paper coating,

In textile dyeing, it can be used as a defoamer and permanent water-absorbing agent in dyeing engineering;

Add this product to the asphalt to reduce the viscosity of the asphalt and improve the softening point, water resistance and weather resistance of the asphalt.

EBS ethylene bis-stearamide emulsion price:

The price of EBS ethylene bis-stearamide emulsion products varies randomly with the production cost, transportation cost, international situation, exchange rate, and the supply and demand relationship of the  EBS ethylene bis-stearamide emulsion products market. Tanki New Materials Co., Ltd. aims to help various industries and chemical wholesalers find high-quality, low-cost nanomaterials and chemicals by providing a full set of customized services. If you are looking for EBS ethylene bis-stearamide emulsion product materials, please feel free to contact for the latest prices of EBS ethylene bis-stearamide emulsion products materials.

Suppliers of EBS ethylene bis-stearamide emulsion:

As a global supplier of EBS ethylene bis-stearamide emulsion, Tanki New Materials Co., Ltd. has extensive experience in the performance, application and cost-effective manufacturing of advanced engineering materials. The company has successfully developed a series of powder materials (including oxides, carbides, nitrides, single metals, etc.), high-purity targets, functional ceramics and structural devices, and provides OEM services.