Trusted Global Chemical Products Manufacuturer
Foamed Concrete Solution

Foamed concrete is the foaming system of the foaming machine to fully foam the foaming agent mechanically,and evenly mix the foam and cement slurry,and then pass the foaming machine's pumping system for in-situ construction or mold forming.A new type of lightweight thermal insulation material with a large number of closed pores formed by natural curing.Foamed concrete is a double set of continuous structure polymer that is mixed with foaming agent,cement,fly ash,stone powder,etc.to form an organic cement.Contain uniform pores.Foamed concrete is used for roof insulation and slope finding,ground insulation cushion,upper turning beam foundation pit filling,wall casting and other energy-saving materials.

Application of foamed concrete 

With its good characteristics,foam concrete is widely used in energy-saving wall materials,and has also been applied in other aspects.At present,the application of foam concrete in China is mainly cast-in-place roof foam concrete insulation layer,foam concrete surface block,and foam concrete Lightweight wall panels and foam concrete compensate the foundation. However,by making full use of the good characteristics of foam concrete,it can be used in construction projects to continue to expand,accelerate the progress of the project,improve the quality of the project,and be used as a retaining wall. The rock wall of the port. Foamed concrete used as a lightweight backfill material behind the quay wall can reduce the vertical interception load and also reduce the lateral load on the quay wall. Construct sports fields and track and field tracks. Use permeable foam concrete with strong drainage capacity as Lightweight foundation,covered with gravel or artificial turf, used as a sports field and used as a sandwich component. In precast reinforced concrete components, foam concrete can be used as the inner core, so that it has good performance of light weight,high strength and heat insulation. Pipeline backfill. Lean concrete fill. Due to the use of flexible hoses,foam concrete has a great workability And adaptability, so it is often used for lean concrete filling. Foamed concrete can also be used for insulation filling of firewalls,sound insulation floor filling,tunnel liner backfilling;and power supply,water pipeline isolation,etc.

As a global foamed cement supplier,Tanki New Materials Co. Ltd has extensive experience in the characteristics,application and cost-effective manufacturing of advanced and engineered materials. If you need foamed cement,please send us an email or click the desired The product is asked for the price.

Payment terms:

Wire transfer,Western Union,Paypal,credit card,etc.

Shipping conditions:

According to customer requirements by air,sea,express.

Storage conditions:

1) Store in a dry environment at room temperature.

2) Avoid humidity and high temperature.

3) Use immediately after opening the inner packaging bag.


  • Sodium laurate CAS 629-25-4
    Sodium laurate (CAS 629-25-4) is a small white powder; soluble in hot water and hot ethanol; slightly soluble in cold ethanol, ether and other organic solvents.
  • Cellular Lightweight Concrete Foaming Agent Protein Foaming Agent
    Protein foaming agent is a new type of foaming agent developed based on the performance of the original cement foaming agent, adjusting the process formula, and repeatedly testing. It can be widely used in floor heating and thermal insulation,roof thermal insulation,CLC blocks,lightweight partitions,fire door core panels,flues,etc.
  • Synthetic foaming agent for cement concrete foaming agent
    Synthetic foaming agents are chemical substances that reduce the surface tension of liquids, and are commonly used in the manufacture of blocks,bricks,CLC concrete,etc.worldwide.Compared with other foaming agents,when high density is required,less energy is required for formation.It is strongly recommended for use in the construction sector where the demand for lightweight concrete is increasing over time.
  • Concrete waterproof admixture
    Concrete waterproof admixture is a chemical admixture added to cement.After the cement is hardened,its volume will expand to compensate for the shrinkage and tension of the steel bars, thereby generating prestress and completely filling the cement gap. Cement waterproofing agent can be directly mixed into cement, concrete and mortar. The bottom surface of the product can form an excellent hydrophobic layer.When water splashes on the surface,it will roll off in the form of water droplets,acting as a lotus leaf.
  • Foam Concrete Admixture Concrete Hardener Early Strength Agent
    Concrete hardener,early intensifier,used in foam concrete is one of concrete admixtures.Early concrete strength agents refer to additives that can increase the early strength of concrete and have no significant effect on the later strength.The main function of the early strength agent is to accelerate the hydration rate of cement and promote the development of early strength of concrete.
  • Cement anti-cracking agent for preventing foam concrete cracks
    Cement anti-cracking agent is a chemically synthesized powder that makes full use of the physical and chemical changes in the cement curing process to prevent cracking,which can significantly improve the strength of lightweight concrete.
  • Melamine Superplasticizer Powder
    The melamine superplasticizer improves the particle structure of the powder through a special powder spraying and drying process.The powder has better fluidity,high water reduction rate, low oxygen ion content, no corrosion to steel bars,and adaptability to various cements.Strong sex and other characteristics.Therefore,when the product is used in powder building materials,the mixing effect is very ideal.
  • Polycarboxylate Superplasticizer Concrete Superplasticizer
    Polycarboxylic acid superplasticizer is a powdery polycarboxylic acid superplasticizer prepared by a new process.Mainly used for ready-mixed dry mortar and unshaped refractory materials.
  • Foam stabilizer for CLC blocks
    The foam stabilizer can reduce the surface tension of the polyurethane raw material mixture, and prevent the thermodynamically unstable state of the foam from appearing through the surface tension during the foam rise to maturation.
  • Gypsum Foaming Agent Protein Foaming Agent
    Gypsum foaming agent has strong foaming ability,high foam stability,and strong applicability to gypsum.It is suitable for gypsum-based wallboard,gypsum self-leveling,gypsum products,etc.
  • Plastering waterproofing agent
    Plaster waterproofing agent is a silicone emulsion waterproofing agent synthesized through a special process and a high-efficiency emulsifier.The waterproofing agent has the characteristics of strong permeability,good waterproof performance,convenient construction and environmental protection.
  • Gypsum retarder sodium citrate
    Because gypsum building materials are light in texture,not easy to deform, and have stable chemical properties after hardening,they will not crack when dry,so gypsum is widely used in daily life.The only disadvantage is the fast setting speed, so the gypsum retarder is introduced. It can well control the setting time of gypsum,keep the gypsum flowing within a certain period of time,can greatly reduce the waste and loss of gypsum,and improve the construction efficiency.
FirstPrev 123 NextLast 1/3
Find Chemical Products by Category
Find Chemicals for Industries
Trusted Global Chemical Products Manufacuturer

Tanki New Materials Co.Ltd Aims to help All industries and Chemical Wholesalers to find high quality, cheap price nano materials and chemicals by providing turn-key customize manufacturing services.

As a trust-worthy global nano-materials and chemicals manufacturer, Tanki New Materials Co.Ltd has been successfully supplying big and small brands with customized nano materials and chemical products in bulk or small quantities.

Tanki New Materials Co.Ltd has rich experiences in the properties, applications, and cost-effective manufacturing of advanced and engineered materials. The company has successfully developed a series of powder materials (including oxides, carbides, nitrides, single metal, etc.), high-purity targets, functional ceramics, and structural devices. OEM service is available.

Our innovative, high-performance materials are widely used in many industries, including but not limited to the automotive, electrical, electronics, information technology, petrochemical, oil, ceramics, paint, metallurgy, solar energy, and catalysis.

Based in the center of China, the company has rich resources and chemical product manufacuturing chains to make sure your cost remain as low as your specifications demand.

The company provides following products such as providing super high quality chemicals and Nano materials such as graphite powder, boron powder , zinc sulfide , nitride powder, Calcium nitride, Ca3N2, 3D printing powder, and so on.

Get the Latest Price for Advanced Nano Materials and Chemicals

Ask a quote for the latest price and one of our team members will respond as soon as possible. Fields marked with * are required.

* * *
  • MSITE CODEhttps://m.ozbo.com/