Performance characteristics of lightweight cement foam separator

Overview of Lightweight Cement Foam Separator

Lightweight cement foam partition wall panels are made of industrial and agricultural solid waste (such as fly ash, coal stone, quartz sand, tailings sand, sawdust, etc.). Cement has the lowest thermal conductivity. The cement insulating core material also compensates for the flammability, permeability, toxicity and short life of traditional materials.

Features of lightweight cement foam partition wall

Material saving: Lightweight foam partition wall panels are made by foaming cement to 8-10 times the original volume and adding about 30% fly ash.

Energy saving: Lightweight foam partition wall panels can easily achieve an energy saving effect of more than 65%. Its thermal insulation performance is 10 times that of a brick wall.

Recycling: At the end of the product life, almost 100% of the core material can be crushed and recycled.

Longevity: The life of foamed cement can reach more than 100 years.

Application of lightweight cement foam partition wall

1. Exterior wall panels

Fireproof for more than 5 hours, reaching A1 fireproof rating

Fast installation speed and good thermal insulation performance (the thickness of the wall is equal to the thickness of the thermal insulation layer, no additional thermal insulation layer is required)

Without special treatment, the cement surface layer can be painted, tiled and decorated. light,

Can reduce the amount of steel used in the overall structure

Good seismic performance

2. Internal partition

Fireproof for more than 5 hours, reaching A1 fireproof rating

The space board with a sound insulation thickness of 120 reaches 45 decibels, which can meet the sound insulation requirements

Good insulation

light

Can reduce the amount of steel used in the overall structure

Can be used as a free-standing building component

Good seismic performance

3. Floor

Good insulation

Fire resistance time exceeds 2 hours

Lightweight and high-strength, by adjusting its internal steel frame, it can meet the design requirements of different load requirements.

Good sound insulation

Fast installation, no need to delete templates

4. On the roof

Fire protection time exceeds 2 hours

Good insulation

Quick install

Waterproof and moisture-proof

Good sound insulation

Performance characteristics of lightweight cement foam separator

1. Fire resistance: The fire resistance time of the wall panel can be as long as 5 hours, and the back temperature is only 46 degrees.

2. High strength: By adjusting the thickness of the cement foam partition wall and the built-in frame, the bearing capacity of the floor slab is 2.5-5.0KN/m2, and the bearing capacity of the floor slab is 1.0~5.0KN/m2.

3. Heat insulation and energy saving: wall thickness = thickness of insulation layer, and the existing energy-saving technologies for building walls in my country all adopt the method of adding an additional insulation layer to the outer wall, and the cement foam partition wall can achieve insulation.

4. Lightweight: The weight of the lightweight cement foam partition wall is only 20% of the weight of the masonry structure or the cast-in-place structure, which can save 80% of the weight.

5. Sound insulation: 120mm thick sound insulation coefficient: ≥45 (dB), by adjusting the thickness of the board, the thickness of the surface layer and the sound insulation performance can easily reach more than 60 (dB).

6. Hydrophobicity: The unique cement foam core material of the lightweight cement foam partition wall has a closed-cell structure with a closed-cell ratio of more than 95% and a water absorption rate of less than 2.5%, which has good hydrophobicity.

7. Durability: 50 years of safe service life, no need to replace in the same life cycle as the building.

The price of lightweight cement foam partition

The price of lightweight cement foam separators varies randomly with production costs, transportation costs, international conditions, exchange rates, and the relationship between supply and demand in the lightweight cement foam separators market. Tanki New Materials Co. Ltd aims to help all industries and chemical wholesalers find high-quality, low-cost nanomaterials and chemicals by providing a full set of customized services. If you are looking for lightweight cement foam partition material, please feel free to contact to get the latest price of lightweight cement foam partition.

Lightweight cement foam partition supplier

As a global supplier of lightweight cement foam separators, Tanki New Materials Co., Ltd. has extensive experience in the performance, application and cost-effective manufacturing of advanced engineering materials. The company has successfully developed a series of blowing agent solutions (including blowing agents, alkaline water agents, early enhancers, etc.), high-purity powder materials (including oxides, carbides, nitrides, single metals, etc.) and high-purity targets , Functional ceramics and structural devices, and provide OEM services.