Gallium oxide preparation process

Gallium oxide Ga2O3 overview

Gallium oxide is an inorganic compound with the chemical formula Ga2O3. Also known as gallium trioxide, it is a wide bandgap semiconductor with Eg=4.9eV. Its electrical conductivity and luminescent properties have long attracted attention. Ga2O3 is a transparent oxide semiconductor material with broad application prospects in optoelectronic devices. It is used as an insulating layer and UV filter for Ga-based semiconductor materials. It can also be used as an O2 chemical detector.

Gallium oxide preparation process

1. Add a high-concentration hot aqueous solution of NaHCO3 to the hot aqueous solution of gallium trichloride GaCl3, and boil until all the hydroxides of gallium are precipitated. Wash the precipitate with hot water until there is no Cl-, and calcine it at above 600 ° C to obtain β-Ga2O3. When NH4Cl remains, it reacts with Ga2O3 at 250°C to generate volatile GaCl3.

2. This is the production method of high-purity Ga2O3. Using high-purity metal Ga as anode, dissolved in 5%~20% H2SO4 solution, adding ammonia water to the solution, cooling, repeatedly crystallizing Ga(NH4)(SO4)2, drying at 105 ℃, under the condition of excess oxygen After burning at 800°C for 2 hours, a product with a purity of 99.99% to 99.9999% is obtained.

3. Weigh 1kg of 99.9999% high-purity gallium into a three-necked flask, add high-purity nitric acid to dissolve the gallium completely, then filter, pour the filtrate into a three-necked flask, and move it to an electric furnace for evaporation (in a fume hood). ), and when concentrated to near crystallization, the solution was transferred to a large evaporating dish and evaporated to dryness. Put the evaporated Ga(NO3)3 in a muffle furnace for burning, the temperature is controlled at 550 ℃, burn for 5 hours, and take out the finished product after cooling to obtain 1.2 kg of high-purity gallium oxide

Gallium oxide Ga2O3 application

Gallium oxide Ga2O3 is used as a high-purity analytical reagent in the electronics industry for the preparation of semiconductor materials.

Gallium oxide has been used in research on lasers, phosphors and luminescent materials. Gallium oxide is also used as an insulating layer for tight connections.

Monoclinic β-Ga2O3 is mainly used in gas sensors and phosphors, and can also be used in dielectric coatings for solar cells.

In semiconductors; gas sensing; in catalysis, gallium oxide is also used.

Application of gallium oxide nanostructures as blue and ultraviolet light emitters in optoelectronic devices.

This stable oxide also shows potential for deep ultraviolet transparent conducting oxides and transistor applications.

Gallium oxide (Ga2O3) thin films have important commercial value as gas sensing materials.

Production of Ga2O3-Al2O3 catalysts using Ss-gallium(III) oxide.

Gallium Oxide Ga2O3 Price

The price of gallium oxide Ga2O3 products will change randomly with the production cost of market supply and demand, transportation cost, international situation, exchange rate and price of gallium oxide Ga2O3 products and other factors. Tanki New Materials Co., Ltd. aims to help industries and chemical wholesalers find high-quality, low-cost nanomaterials and chemicals by providing a full range of customized services. If you are looking for gallium oxide Ga2O3 product powder, please feel free to send for the latest gallium oxide Ga2O3 product powder price.

Gallium Oxide Ga2O3 Powder Supplier

As a global supplier of gallium oxide Ga2O3 powders, Tanki New Materials Ltd. has extensive experience in the performance, application and cost-effective manufacturing of advanced and engineered materials. The company has successfully developed a series of powder materials (cerium oxide, zinc oxide, nickel oxide, indium tin oxide), high-purity targets, functional ceramics and structural devices, and provides OEM services.